• Product 45 of 68
KATI-MINI-3500

KATIMEX® Cable laying device for fibre optic cables, KATI® BLITZ MINI, 35m

  • Product 45 of 68
KATI-MINI-3500

KATIMEX® Cable laying device for fibre optic cables, KATI® BLITZ MINI, 35m

127,00 €*

the revolutionary solution for inhouse installation

KATI® BLITZ MINI was specifically developed for the growing demand of subsequent fibre-optic cables installation in existing as well as occupied tubes.

Where conventional pulling tools are not sufficient anymore, the KATI® BLITZ MINI shows its unique possibilities with its 1.2 mm diameter fibreglass profile. Especially the installation of fibre-optic cables in an already existing infrastructure is easier and sometimes even at all possible with the KATI® BLITZ MINI, which makes it the ideal support for the pulling of fibre-optic cables in buildings.

The Polykat® Mini combines high rod rigidity and pushing stability with a very small diameter. With a very small bending radius of 15mm it was specifically developed to run through extremely narrow curves.

The combination of Flexi Sonde Mini and low-friction insertion tube enables a quick and easy cable installation. The Flexi Sonde Mini has a special contour that passes narrow sections and curves easily. The low-friction insertion tube leads the rod and protects it form breakages when pulling back.

ThePolykat® Mini fibreglass profile, as well as the spare rods pre-spooled into a cas-sette are available in 15, 25 and 35 meter versions. Therefore the cassette can be exchanged quick and easy. The rod runs automatically out of the cassette and supports the pushing of the rod. Due to this the physical effort will be minimized.

Accessories included
5 Flexi Sonds Mini
7 Rod ends Mini
1 Tape
1 Guiding hose 2,5 m with bush
1 Abrasive pad 50 x 50 mm
1 Special adhesive 3 g

Advantages:

  • Flexi-Sonde Mini: special contour to pass narrow sections and curves
  • Rotatable cassette: By spinning the cassette the rod can be pushed easily into conduits
  • Axle bearing of the cassette: the high reset force supports the automatic unwinding of the rod.
  • Insertion tube: protects and guides the fibreglass while pushing in and prevents it from breaking when pulling back.
  • Handling frame with rod-stop: prevents the automatic unwinding of the rod when not in use.

Miscellaneous:

  • Rod diameter: 1,2mm
  • Proven strength connection Rod/Rod end: >0,35 kN
  • Proven strength of Flexi Sonde Mini: >0,25 kN
  • Minimum bending radius: 15mm
  • Breaking strain: 1,3 kN
Article number KATI-MINI-3500
Name KATI® BLITZ MINI
EAN 4049371471725
Brand KATIMEX®
Type Cable laying device for fibre optic cables
Model 35m
KATIMEX® Cable laying device for fibre optic cables, KATI® BLITZ MINI, 35m

Advantages:
- Flexi-Sonde Mini: special contour to pass narrow sections and curves
- Rotatable cassette: By spinning the cassette the rod can be pushed easily into conduits
- Axle bearing of the cassette: the high reset force supports the automatic unwinding of the rod.
- Insertion tube: protects and guides the fibreglass while pushing in and prevents it from breaking when pulling back.
- Handling frame with rod-stop: prevents the automatic unwinding of the rod when not in use.

Miscellaneous:
- Rod diameter: 1,2mm
- Proven strength connection Rod/Rod end: >0,35 kN
- Proven strength of Flexi Sonde Mini: >0,25 kN
- Minimum bending radius: 15mm
- Breaking strain: 1,3 kN

Technical Data:
- Article number: KATI-MINI-3500
- Name: KATI® BLITZ MINI
- EAN: 4049371471725
- Brand: KATIMEX®
- Type: Cable laying device for fibre optic cables
- Model: 35m

the revolutionary solution for inhouse installation

KATI® BLITZ MINI was specifically developed for the growing demand of subsequent fibre-optic cables installation in existing as well as occupied tubes.

Where conventional pulling tools are not sufficient anymore, the KATI® BLITZ MINI shows its unique possibilities with its 1.2 mm diameter fibreglass profile. Especially the installation of fibre-optic cables in an already existing infrastructure is easier and sometimes even at all possible with the KATI® BLITZ MINI, which makes it the ideal support for the pulling of fibre-optic cables in buildings.

The Polykat® Mini combines high rod rigidity and pushing stability with a very small diameter. With a very small bending radius of 15mm it was specifically developed to run through extremely narrow curves.

The combination of Flexi Sonde Mini and low-friction insertion tube enables a quick and easy cable installation. The Flexi Sonde Mini has a special contour that passes narrow sections and curves easily. The low-friction insertion tube leads the rod and protects it form breakages when pulling back.

ThePolykat® Mini fibreglass profile, as well as the spare rods pre-spooled into a cas-sette are available in 15, 25 and 35 meter versions. Therefore the cassette can be exchanged quick and easy. The rod runs automatically out of the cassette and supports the pushing of the rod. Due to this the physical effort will be minimized.

Accessories included
5 Flexi Sonds Mini
7 Rod ends Mini
1 Tape
1 Guiding hose 2,5 m with bush
1 Abrasive pad 50 x 50 mm
1 Special adhesive 3 g

Advantages:

  • Flexi-Sonde Mini: special contour to pass narrow sections and curves
  • Rotatable cassette: By spinning the cassette the rod can be pushed easily into conduits
  • Axle bearing of the cassette: the high reset force supports the automatic unwinding of the rod.
  • Insertion tube: protects and guides the fibreglass while pushing in and prevents it from breaking when pulling back.
  • Handling frame with rod-stop: prevents the automatic unwinding of the rod when not in use.

Miscellaneous:

  • Rod diameter: 1,2mm
  • Proven strength connection Rod/Rod end: >0,35 kN
  • Proven strength of Flexi Sonde Mini: >0,25 kN
  • Minimum bending radius: 15mm
  • Breaking strain: 1,3 kN
Article number KATI-MINI-3500
Name KATI® BLITZ MINI
EAN 4049371471725
Brand KATIMEX®
Type Cable laying device for fibre optic cables
Model 35m
KATIMEX® Cable laying device for fibre optic cables, KATI® BLITZ MINI, 35m

Advantages:
- Flexi-Sonde Mini: special contour to pass narrow sections and curves
- Rotatable cassette: By spinning the cassette the rod can be pushed easily into conduits
- Axle bearing of the cassette: the high reset force supports the automatic unwinding of the rod.
- Insertion tube: protects and guides the fibreglass while pushing in and prevents it from breaking when pulling back.
- Handling frame with rod-stop: prevents the automatic unwinding of the rod when not in use.

Miscellaneous:
- Rod diameter: 1,2mm
- Proven strength connection Rod/Rod end: >0,35 kN
- Proven strength of Flexi Sonde Mini: >0,25 kN
- Minimum bending radius: 15mm
- Breaking strain: 1,3 kN

Technical Data:
- Article number: KATI-MINI-3500
- Name: KATI® BLITZ MINI
- EAN: 4049371471725
- Brand: KATIMEX®
- Type: Cable laying device for fibre optic cables
- Model: 35m
* incl. tax, plus shipping, without trade discount.