and this in one jacket! To minimize the diameter or to save space, AES/EBU or DMX cables are normally wired in crossover mode as is the case with our BINARY 434 cable. In the worst case the wires can move a little under extremely tough use, which might result in a slightly wider tolerance range of the electrical data. To be on the safe side, one can now go for the somewhat more sophisticated version, where the two wire pairs are shielded individually and once again insulated from each other by an AL/PT foil. Of course, the cable will thereby grow a little in diameter which, however, will give the cable additional stability. The new Binary 422 TP DMX512 (TWISTED PAIR) is delivered in a cold resistant and notch-proof S-PVC jacket. With its double shielding (AL/PT foil + Cu braid) and the wire coding it complies with the generally applicable regulations (VDE 0812/VDE 0207). Transfer speed 256 Kbs pursuant to EIA 485.
Advantages:
Digital transmission over long distances due to the DMX and AES/EBU standards
Excellent protection against electric interference (Cu mesh screen + AL/PT foil) plus Twisted Pair design
Extremely robust due to the special tough jacket
Application:
Networking of scanners and lighting systems with check-back function
Connection of digital control units and devices of all kinds
S-PVC jacket for mobile outdoor applications
Article number
542-0051
Name
Binary 422 TP DMX512
EAN
4049371002424
Properties
Digital 110 Ω AES / EBU
Properties
OFC oxygen free copper
Properties
Analog
Properties
In-ground / burial
Application area
ELA 100 V
Application area
Stage / live
Application area
Installation
Application area
Studio / Broadcast
Application area
Mobile outdoor / indoor
Application
DMX
Colour
black
Colour detailed
black
Signal transmission
symmetrical
Construction
[2(2LI2YS0,22mm²)(ST)]CY
Jacket material
S-PVC
Jacket Ø [mm]
8,00
Number of Channels (AES/EBU, DMX)
1
Inner conductor (AES/EBU, DMX)
4
Inner conductor (AES/EBU, DMX) [mm²]
0,22
Inner conductor Ø (AES/EBU, DMX) [mm]
0,53
AWG (AES/EBU, DMX)
24
Shielding
Copper braiding tin-plated + 2 x AL / PT foil
Shielding factor [%]
100
Copper strands (AES/EBU, DMX)
7
Copper strand Ø (AES/EBU, DMX) [mm]
0,20
Conductor insulation material
Foam / Skin-PE
Conductor insulation Ø [mm]
1,55
Weight per 1 m [g]
76
UV-resistant
yes
Fire load per m [kWh]
0,25
Style variant
round
Packing
100 m spool
Temperature min. [°C]
-25
Temperature max. [°C]
70
Width [mm]
8
[mm]
8
Capac. cond./cond. per 1 m (AES/EBU, DMX) [pF]
45
Capacity wire/wire at 1 ft. (AES/EBU, DMX) [pF]
13,716
Capac. cond./shield. per 1 m (AES/EBU, DMX) [pF]
110
Capacity wire/electic screen at 1 ft. (AES/EBU, DMX) [pF]
33,528
Impedance [Ω]
110
Insulation resist. per 1 km [GΩ]
0,1
Insulation resist. per 1000 feet [GΩ]
0,0305
Insulation resist. per 1 km (AES/EBU, DMX) [GΩ]
0,1
Insulation resist. per 1000 feet (AES/EBU, DMX) [GΩ]
and this in one jacket! To minimize the diameter or to save space, AES/EBU or DMX cables are normally wired in crossover mode as is the case with our BINARY 434 cable. In the worst case the wires can move a little under extremely tough use, which might result in a slightly wider tolerance range of the electrical data. To be on the safe side, one can now go for the somewhat more sophisticated version, where the two wire pairs are shielded individually and once again insulated from each other by an AL/PT foil. Of course, the cable will thereby grow a little in diameter which, however, will give the cable additional stability. The new Binary 422 TP DMX512 (TWISTED PAIR) is delivered in a cold resistant and notch-proof S-PVC jacket. With its double shielding (AL/PT foil + Cu braid) and the wire coding it complies with the generally applicable regulations (VDE 0812/VDE 0207). Transfer speed 256 Kbs pursuant to EIA 485.
Advantages:
Digital transmission over long distances due to the DMX and AES/EBU standards
Excellent protection against electric interference (Cu mesh screen + AL/PT foil) plus Twisted Pair design
Extremely robust due to the special tough jacket
Application:
Networking of scanners and lighting systems with check-back function
Connection of digital control units and devices of all kinds
