• Product 71 of 453
PBS1-KA1

Rack panel, with brushes for cable inlet, Brush height 20 mm, 1 HE, Sheet steel, 1.5mm, black, Strain relief possible with ZEPB

  • Product 71 of 453
PBS1-KA1

Rack panel, with brushes for cable inlet, Brush height 20 mm, 1 HE, Sheet steel, 1.5mm, black, Strain relief possible with ZEPB

40,94 €*

A 19” panel is not just...

a “piece of steel with holes in it”, but an important utensil for rack wiring in media technology and stage work. These panels should not just provide a decent cladding and an indestructible coating, but must also be constructed so they won’t give way or collapse when exposed to heavy strain and pressure.
The front panels are made of black (PBS series...) or charcoal grey (PBA series...) powder-coated 1.2 mm or 2 mm sheet steel (depending on version). A U-profile on the top and bottom edges provides higher rigidity.

The optional strain relief clamp (order number ZEPB) can be used to reduce pressure on the cables on the back. For labelling we recommend our writable magnetic strip (order number ZSPB) or number strip (order number NSPB...). The broadcast series (PBQ...) is new to our product line. It is made of 4 mm anodised aluminium sheeting, reinforced by a rear stainless steel bracket. The connectors are all fitted from behind (the panels have been milled off from behind for this). The SYSBOXX SYPS-03-MK2 labelling profile can be used for labelling. Of course, we can also produce custom models. Please contact us by fax or e-mail (info@sommercable.com) with details of your project.

EAN 4049371031776
Type Rack panel, with brushes for cable inlet
Colour black
Colour detailed black
Weight [kg] 0,335
Model Brush height 20 mm
Model 1 HE
Model Brush height 437 mm
Material Sheet steel, 1.5mm
Additional function Strain relief possible with ZEPB
Height unit [HE] 1
Rack panel, with brushes for cable inlet, Brush height 20 mm, 1 HE



Technical Data:
- Type: Rack panel, with brushes for cable inlet
- Colour: black
- Colour detailed: black
- Model: Brush height 437 mm
- Model: 1 HE
- Model: Brush height 20 mm
- Material: Sheet steel, 1.5mm
- Additional function: Strain relief possible with ZEPB

A 19” panel is not just...

a “piece of steel with holes in it”, but an important utensil for rack wiring in media technology and stage work. These panels should not just provide a decent cladding and an indestructible coating, but must also be constructed so they won’t give way or collapse when exposed to heavy strain and pressure.
The front panels are made of black (PBS series...) or charcoal grey (PBA series...) powder-coated 1.2 mm or 2 mm sheet steel (depending on version). A U-profile on the top and bottom edges provides higher rigidity.

The optional strain relief clamp (order number ZEPB) can be used to reduce pressure on the cables on the back. For labelling we recommend our writable magnetic strip (order number ZSPB) or number strip (order number NSPB...). The broadcast series (PBQ...) is new to our product line. It is made of 4 mm anodised aluminium sheeting, reinforced by a rear stainless steel bracket. The connectors are all fitted from behind (the panels have been milled off from behind for this). The SYSBOXX SYPS-03-MK2 labelling profile can be used for labelling. Of course, we can also produce custom models. Please contact us by fax or e-mail (info@sommercable.com) with details of your project.

EAN 4049371031776
Type Rack panel, with brushes for cable inlet
Colour black
Colour detailed black
Weight [kg] 0,335
Model Brush height 20 mm
Model 1 HE
Model Brush height 437 mm
Material Sheet steel, 1.5mm
Additional function Strain relief possible with ZEPB
Height unit [HE] 1
Rack panel, with brushes for cable inlet, Brush height 20 mm, 1 HE



Technical Data:
- Type: Rack panel, with brushes for cable inlet
- Colour: black
- Colour detailed: black
- Model: Brush height 437 mm
- Model: 1 HE
- Model: Brush height 20 mm
- Material: Sheet steel, 1.5mm
- Additional function: Strain relief possible with ZEPB
* incl. tax, plus shipping, without trade discount.