• Product 54 of 83
DVM-SYS-DISH

Single-DI-Box, Professional, W x H x D: 68 mm x 36 mm

  • Product 54 of 83
DVM-SYS-DISH

Single-DI-Box, Professional, W x H x D: 68 mm x 36 mm

234,00 €*

High-Z Direct Box – the specialist!

With these specialists very demanding signal sources can be adapted to microphone inputs. The ultra-grade special transformers from Swedish manufacturer
LUNDAHL with 22 dB or 28 dB of attenuation that we use can handle even very high input levels. And this combined with super low distortions and an absolutely neutral behaviour – even down to sub-low frequencies. These specialists are ideal for the direct connection of old analogue synthesizers or string instruments to mixing consoles or preamps, especially if the instrument has no active electronics of its own.
Each channel has two bridged jack sockets, if required the groundlift switch can link the input and output earths. The output signals are present on male XLR connectors. The I/P impedance selector is used to switch between the normal 280 k input impedance and the high 560 k impedance setting. For technical reasons the HIGH position is coupled with the greater attenuation of 28 dB.

Miscellaneous:

  • Phase response: +1 degree / 10 Hz, –1,5 degree / 20 kHz
  • Unbalance attenuation input: ≥ 100 dB/20 Hz, ≥ 95 dB/1 kHz, ≥ 60 dB/20 kHz
  • THD&N @ 0dBu input level: . . . . . ¤ 0.008%/20 Hz, ¤ 0.004%/1 kHz, ¤ 0.004%/40 kHz (80 kHz bandwidth)
  • THD&N @ 0dBu input level: Hi Z . ¤ 0.012%/20 Hz, ¤ 0.008%/1 kHz, ¤ 0.008%/40 kHz (80 kHz bandwidth)

Application:

  • for integration into SYSBOXX frames
Article number DVM-SYS-DISH
EAN 4049371243476
Type Single-DI-Box
Weight [kg] 0,27
Model Professional
Frequency response –0,1 dB / –0,7 dB / –5,5 dB, 10 Hz / 20 kHz / 100 kHz (source 6,8 kΩ, load 2 kΩ)
Frequency response –0,1 dB / +0,1 dB / –0,5 dB, 10 Hz / 20 kHz / 100 kHz (source 200 Ω, load 2k Ω)
Frequency response –0,7 dB / –6,1 dB / –17,3 dB, 10 Hz / 20 kHz / 100 kHz (source 47 kΩ, load 2 kΩ)
Length [mm] 105
Width [mm] 68
[mm] 36
Output impedance [Ω] 200
Input impedance [kΩ] 560
Input impedance [kΩ] 280
max. Input level +30 dBu / 1 kHz @ THD&N ≤ 0,001% (source 200 Ω, load 2 kΩ)
max. Input level +28 dBu / 20 Hz @ THD&N ≤ 0,4% (source 200 Ω, load 2 kΩ)
Electrical strength DC: 3,5 kV, AC: 1,5 kV (limited by groundlift switch)
Old article number DVM-191-DISH
Single-DI-Box, Professional, W x H x D: 68 mm x 36 mm

Application:
- for integration into SYSBOXX frames

Miscellaneous:
- Phase response: +1 degree / 10 Hz, –1,5 degree / 20 kHz
- Unbalance attenuation input: ≥ 100 dB/20 Hz, ≥ 95 dB/1 kHz, ≥ 60 dB/20 kHz
- THD&N @ 0dBu input level: . . . . . ¤ 0.008%/20 Hz, ¤ 0.004%/1 kHz, ¤ 0.004%/40 kHz (80 kHz bandwidth)
- THD&N @ 0dBu input level: Hi Z . ¤ 0.012%/20 Hz, ¤ 0.008%/1 kHz, ¤ 0.008%/40 kHz (80 kHz bandwidth)

Technical Data:
- Type: Single-DI-Box
- Model: Professional
- Frequency response: –0,1 dB / +0,1 dB / –0,5 dB, 10 Hz / 20 kHz / 100 kHz (source 200 Ω, load 2k Ω)
- Frequency response: –0,7 dB / –6,1 dB / –17,3 dB, 10 Hz / 20 kHz / 100 kHz (source 47 kΩ, load 2 kΩ)
- Frequency response: –0,1 dB / –0,7 dB / –5,5 dB, 10 Hz / 20 kHz / 100 kHz (source 6,8 kΩ, load 2 kΩ)
- max. Input level: +28 dBu / 20 Hz @ THD&N ≤ 0,4% (source 200 Ω, load 2 kΩ)
- max. Input level: +30 dBu / 1 kHz @ THD&N ≤ 0,001% (source 200 Ω, load 2 kΩ)
- Electrical strength: DC: 3,5 kV, AC: 1,5 kV (limited by groundlift switch)

High-Z Direct Box – the specialist!

With these specialists very demanding signal sources can be adapted to microphone inputs. The ultra-grade special transformers from Swedish manufacturer
LUNDAHL with 22 dB or 28 dB of attenuation that we use can handle even very high input levels. And this combined with super low distortions and an absolutely neutral behaviour – even down to sub-low frequencies. These specialists are ideal for the direct connection of old analogue synthesizers or string instruments to mixing consoles or preamps, especially if the instrument has no active electronics of its own.
Each channel has two bridged jack sockets, if required the groundlift switch can link the input and output earths. The output signals are present on male XLR connectors. The I/P impedance selector is used to switch between the normal 280 k input impedance and the high 560 k impedance setting. For technical reasons the HIGH position is coupled with the greater attenuation of 28 dB.

Miscellaneous:

  • Phase response: +1 degree / 10 Hz, –1,5 degree / 20 kHz
  • Unbalance attenuation input: ≥ 100 dB/20 Hz, ≥ 95 dB/1 kHz, ≥ 60 dB/20 kHz
  • THD&N @ 0dBu input level: . . . . . ¤ 0.008%/20 Hz, ¤ 0.004%/1 kHz, ¤ 0.004%/40 kHz (80 kHz bandwidth)
  • THD&N @ 0dBu input level: Hi Z . ¤ 0.012%/20 Hz, ¤ 0.008%/1 kHz, ¤ 0.008%/40 kHz (80 kHz bandwidth)

Application:

  • for integration into SYSBOXX frames
Article number DVM-SYS-DISH
EAN 4049371243476
Type Single-DI-Box
Weight [kg] 0,27
Model Professional
Frequency response –0,1 dB / –0,7 dB / –5,5 dB, 10 Hz / 20 kHz / 100 kHz (source 6,8 kΩ, load 2 kΩ)
Frequency response –0,1 dB / +0,1 dB / –0,5 dB, 10 Hz / 20 kHz / 100 kHz (source 200 Ω, load 2k Ω)
Frequency response –0,7 dB / –6,1 dB / –17,3 dB, 10 Hz / 20 kHz / 100 kHz (source 47 kΩ, load 2 kΩ)
Length [mm] 105
Width [mm] 68
[mm] 36
Output impedance [Ω] 200
Input impedance [kΩ] 560
Input impedance [kΩ] 280
max. Input level +30 dBu / 1 kHz @ THD&N ≤ 0,001% (source 200 Ω, load 2 kΩ)
max. Input level +28 dBu / 20 Hz @ THD&N ≤ 0,4% (source 200 Ω, load 2 kΩ)
Electrical strength DC: 3,5 kV, AC: 1,5 kV (limited by groundlift switch)
Old article number DVM-191-DISH
Single-DI-Box, Professional, W x H x D: 68 mm x 36 mm

Application:
- for integration into SYSBOXX frames

Miscellaneous:
- Phase response: +1 degree / 10 Hz, –1,5 degree / 20 kHz
- Unbalance attenuation input: ≥ 100 dB/20 Hz, ≥ 95 dB/1 kHz, ≥ 60 dB/20 kHz
- THD&N @ 0dBu input level: . . . . . ¤ 0.008%/20 Hz, ¤ 0.004%/1 kHz, ¤ 0.004%/40 kHz (80 kHz bandwidth)
- THD&N @ 0dBu input level: Hi Z . ¤ 0.012%/20 Hz, ¤ 0.008%/1 kHz, ¤ 0.008%/40 kHz (80 kHz bandwidth)

Technical Data:
- Type: Single-DI-Box
- Model: Professional
- Frequency response: –0,1 dB / +0,1 dB / –0,5 dB, 10 Hz / 20 kHz / 100 kHz (source 200 Ω, load 2k Ω)
- Frequency response: –0,7 dB / –6,1 dB / –17,3 dB, 10 Hz / 20 kHz / 100 kHz (source 47 kΩ, load 2 kΩ)
- Frequency response: –0,1 dB / –0,7 dB / –5,5 dB, 10 Hz / 20 kHz / 100 kHz (source 6,8 kΩ, load 2 kΩ)
- max. Input level: +28 dBu / 20 Hz @ THD&N ≤ 0,4% (source 200 Ω, load 2 kΩ)
- max. Input level: +30 dBu / 1 kHz @ THD&N ≤ 0,001% (source 200 Ω, load 2 kΩ)
- Electrical strength: DC: 3,5 kV, AC: 1,5 kV (limited by groundlift switch)
* incl. tax, plus shipping, without trade discount.