• Product 72 of 130
542-0052

DMX Binary 422 TP DMX512; 4 x 0,22 mm²; S-PVC Ø 8,00 mm; blue

  • Product 72 of 130
542-0052

DMX Binary 422 TP DMX512; 4 x 0,22 mm²; S-PVC Ø 8,00 mm; blue

5,40 €*
Note: coiling charges will apply

These two don’t want to know each other...

and this in one jacket! To minimize the diameter or to save space, AES/EBU or DMX cables are normally wired in crossover mode as is the case with our BINARY 434 cable. In the worst case the wires can move a little under extremely tough use, which might result in a slightly wider tolerance range of the electrical data. To be on the safe side, one can now go for the somewhat more sophisticated version, where the two wire pairs are shielded individually and once again insulated from each other by an AL/PT foil. Of course, the cable will thereby grow a little in diameter which, however, will give the cable additional stability. The new Binary 422 TP DMX512 (TWISTED PAIR) is delivered in a cold resistant and notch-proof S-PVC jacket. With its double shielding (AL/PT foil + Cu braid) and the wire coding it complies with the generally applicable regulations (VDE 0812/VDE 0207). Transfer speed 256 Kbs pursuant to EIA 485.

Advantages:

  • Digital transmission over long distances due to the DMX and AES/EBU standards
  • Excellent protection against electric interference (Cu mesh screen + AL/PT foil)
    plus Twisted Pair design
  • Extremely robust due to the special tough jacket

Application:

  • Networking of scanners and lighting systems with check-back function
  • Connection of digital control units and devices of all kinds
  • S-PVC jacket for mobile outdoor applications
Article number 542-0052
Name Binary 422 TP DMX512
EAN 4049371002431
Properties Digital 110 Ω AES / EBU
Properties OFC oxygen free copper
Properties Analog
Properties In-ground / burial
Application area Mobile outdoor / indoor
Application area ELA 100 V
Application area Stage / live
Application area Installation
Application area Studio / Broadcast
Application DMX
Colour blue
Colour detailed blue
Signal transmission symmetrical
Construction [2(2LI2YS0,22mm²)(ST)]CY
Jacket material S-PVC
Jacket Ø [mm] 8,00
Number of Channels (AES/EBU, DMX) 1
Inner conductor (AES/EBU, DMX) 4
Inner conductor (AES/EBU, DMX) [mm²] 0,22
Inner conductor Ø (AES/EBU, DMX) [mm] 0,53
AWG (AES/EBU, DMX) 24
Shielding Copper braiding tin-plated + 2 x AL / PT foil
Shielding factor [%] 100
Copper strands (AES/EBU, DMX) 7
Copper strand Ø (AES/EBU, DMX) [mm] 0,20
Conductor insulation material Foam / Skin-PE
Conductor insulation Ø [mm] 1,55
Weight per 1 m [g] 76
Fire load per m [kWh] 0,25
Style variant round
Packing 100 m spool
Temperature min. [°C] -25
Temperature max. [°C] 70
Width [mm] 8
[mm] 8
Capac. cond./cond. per 1 m (AES/EBU, DMX) [pF] 45
Capacity wire/wire at 1 ft. (AES/EBU, DMX) [pF] 13,716
Capac. cond./shield. per 1 m (AES/EBU, DMX) [pF] 110
Capacity wire/electic screen at 1 ft. (AES/EBU, DMX) [pF] 33,528
Impedance [Ω] 110
Insulation resist. per 1 km [GΩ] 0,1
Insulation resist. per 1000 feet [GΩ] 0,0305
Insulation resist. per 1 km (AES/EBU, DMX) [GΩ] 0,1
Insulation resist. per 1000 feet (AES/EBU, DMX) [GΩ] 0,0305
Conductor resistance per 1 km [Ω] 87
Conductor resistance per 1000 ft. [Ω] 26,5176
Shield. resistance per 1 km [Ω] 15
Shield. resistance per 1000 ft. [Ω] 4,572
BPVo-Euroclass Fca
Binary 422 TP DMX512
DMX

Advantages:
- Digital transmission over long distances due to the DMX and AES/EBU standards
- Excellent protection against electric interference (Cu mesh screen + AL/PT foil)
plus Twisted Pair design
- Extremely robust due to the special tough jacket

Application:
- Networking of scanners and lighting systems with check-back function
- Connection of digital control units and devices of all kinds
- S-PVC jacket for mobile outdoor applications

Technical Data:
- Article number: 542-0052
- Name: Binary 422 TP DMX512
- EAN: 4049371002431
- Properties: OFC oxygen free copper
- Properties: Digital 110 Ω AES / EBU
- Properties: In-ground / burial
- Properties: Analog
- Application area: Mobile outdoor / indoor
- Application area: Studio / Broadcast
- Application area: Installation
- Application area: Stage / live
- Application area: ELA 100 V
- Application: DMX
- Colour: blue
- Signal transmission: symmetrical
- Construction: [2(2LI2YS0,22mm²)(ST)]CY
- Jacket material: S-PVC
- Jacket Ø: 8,00 mm
- Jacket Ø: 0.315 "
- Number of Channels (AES/EBU, DMX): 1
- Inner conductor (AES/EBU, DMX): 4
- Inner conductor (AES/EBU, DMX): 0,22 mm²
- Inner conductor (AES/EBU, DMX): 0.0003 sqin
- Inner conductor Ø (AES/EBU, DMX): 0,53 mm
- Inner conductor Ø (AES/EBU, DMX): 0.0209 "
- AWG (AES/EBU, DMX): 24
- Shielding: Copper braiding tin-plated + 2 x AL / PT foil
- Shielding factor: 100 %
- Copper strands (AES/EBU, DMX): 7
- Copper strand Ø (AES/EBU, DMX): 0,20 mm
- Copper strand Ø (AES/EBU, DMX): 0.0079 "
- Conductor insulation material: Foam / Skin-PE
- Conductor insulation Ø: 1,55 mm
- Conductor insulation Ø: 0.061 "
- Weight per 1 m: 76 g
- Weight at 1000 ft.: 51.1416 lbs
- Fire load per m: 0,25 kWh
- Style variant: round
- Packing: 100 m spool
- Temperature min.: -25 °C
- Temperature max.: 70 °C
- Width: 8 mm
- Width: 0.315 "
- Height: 8 mm
- Height: 0.315 "
- Capac. cond./cond. per 1 m (AES/EBU, DMX): 45 pF
- Capacity wire/wire at 1 ft. (AES/EBU, DMX): 13.716 pF
- Capac. cond./shield. per 1 m (AES/EBU, DMX): 110 pF
- Capacity wire/electic screen at 1 ft. (AES/EBU, DMX): 33.528 pF
- Impedance: 110 Ω
- Insulation resist. per 1 km: 0,1 GΩ
- Insulation resist. per 1000 feet: 0.0305 GΩ
- Insulation resist. per 1 km (AES/EBU, DMX): 0,1 GΩ
- Insulation resist. per 1000 feet (AES/EBU, DMX): 0.0305 GΩ
- Conductor resistance per 1 km: 87 Ω
- Conductor resistance per 1000 ft.: 26.5176 Ω
- Shield. resistance per 1 km: 15 Ω
- Shield. resistance per 1000 ft.: 4.572 Ω
- BPVo-Euroclass: Fca

These two don’t want to know each other...

and this in one jacket! To minimize the diameter or to save space, AES/EBU or DMX cables are normally wired in crossover mode as is the case with our BINARY 434 cable. In the worst case the wires can move a little under extremely tough use, which might result in a slightly wider tolerance range of the electrical data. To be on the safe side, one can now go for the somewhat more sophisticated version, where the two wire pairs are shielded individually and once again insulated from each other by an AL/PT foil. Of course, the cable will thereby grow a little in diameter which, however, will give the cable additional stability. The new Binary 422 TP DMX512 (TWISTED PAIR) is delivered in a cold resistant and notch-proof S-PVC jacket. With its double shielding (AL/PT foil + Cu braid) and the wire coding it complies with the generally applicable regulations (VDE 0812/VDE 0207). Transfer speed 256 Kbs pursuant to EIA 485.

Advantages:

  • Digital transmission over long distances due to the DMX and AES/EBU standards
  • Excellent protection against electric interference (Cu mesh screen + AL/PT foil)
    plus Twisted Pair design
  • Extremely robust due to the special tough jacket

Application:

  • Networking of scanners and lighting systems with check-back function
  • Connection of digital control units and devices of all kinds
  • S-PVC jacket for mobile outdoor applications
Article number 542-0052
Name Binary 422 TP DMX512
EAN 4049371002431
Properties Digital 110 Ω AES / EBU
Properties OFC oxygen free copper
Properties Analog
Properties In-ground / burial
Application area Mobile outdoor / indoor
Application area ELA 100 V
Application area Stage / live
Application area Installation
Application area Studio / Broadcast
Application DMX
Colour blue
Colour detailed blue
Signal transmission symmetrical
Construction [2(2LI2YS0,22mm²)(ST)]CY
Jacket material S-PVC
Jacket Ø [mm] 8,00
Number of Channels (AES/EBU, DMX) 1
Inner conductor (AES/EBU, DMX) 4
Inner conductor (AES/EBU, DMX) [mm²] 0,22
Inner conductor Ø (AES/EBU, DMX) [mm] 0,53
AWG (AES/EBU, DMX) 24
Shielding Copper braiding tin-plated + 2 x AL / PT foil
Shielding factor [%] 100
Copper strands (AES/EBU, DMX) 7
Copper strand Ø (AES/EBU, DMX) [mm] 0,20
Conductor insulation material Foam / Skin-PE
Conductor insulation Ø [mm] 1,55
Weight per 1 m [g] 76
Fire load per m [kWh] 0,25
Style variant round
Packing 100 m spool
Temperature min. [°C] -25
Temperature max. [°C] 70
Width [mm] 8
[mm] 8
Capac. cond./cond. per 1 m (AES/EBU, DMX) [pF] 45
Capacity wire/wire at 1 ft. (AES/EBU, DMX) [pF] 13,716
Capac. cond./shield. per 1 m (AES/EBU, DMX) [pF] 110
Capacity wire/electic screen at 1 ft. (AES/EBU, DMX) [pF] 33,528
Impedance [Ω] 110
Insulation resist. per 1 km [GΩ] 0,1
Insulation resist. per 1000 feet [GΩ] 0,0305
Insulation resist. per 1 km (AES/EBU, DMX) [GΩ] 0,1
Insulation resist. per 1000 feet (AES/EBU, DMX) [GΩ] 0,0305
Conductor resistance per 1 km [Ω] 87
Conductor resistance per 1000 ft. [Ω] 26,5176
Shield. resistance per 1 km [Ω] 15
Shield. resistance per 1000 ft. [Ω] 4,572
BPVo-Euroclass Fca
Binary 422 TP DMX512
DMX

Advantages:
- Digital transmission over long distances due to the DMX and AES/EBU standards
- Excellent protection against electric interference (Cu mesh screen + AL/PT foil)
plus Twisted Pair design
- Extremely robust due to the special tough jacket

Application:
- Networking of scanners and lighting systems with check-back function
- Connection of digital control units and devices of all kinds
- S-PVC jacket for mobile outdoor applications

Technical Data:
- Article number: 542-0052
- Name: Binary 422 TP DMX512
- EAN: 4049371002431
- Properties: OFC oxygen free copper
- Properties: Digital 110 Ω AES / EBU
- Properties: In-ground / burial
- Properties: Analog
- Application area: Mobile outdoor / indoor
- Application area: Studio / Broadcast
- Application area: Installation
- Application area: Stage / live
- Application area: ELA 100 V
- Application: DMX
- Colour: blue
- Signal transmission: symmetrical
- Construction: [2(2LI2YS0,22mm²)(ST)]CY
- Jacket material: S-PVC
- Jacket Ø: 8,00 mm
- Jacket Ø: 0.315 "
- Number of Channels (AES/EBU, DMX): 1
- Inner conductor (AES/EBU, DMX): 4
- Inner conductor (AES/EBU, DMX): 0,22 mm²
- Inner conductor (AES/EBU, DMX): 0.0003 sqin
- Inner conductor Ø (AES/EBU, DMX): 0,53 mm
- Inner conductor Ø (AES/EBU, DMX): 0.0209 "
- AWG (AES/EBU, DMX): 24
- Shielding: Copper braiding tin-plated + 2 x AL / PT foil
- Shielding factor: 100 %
- Copper strands (AES/EBU, DMX): 7
- Copper strand Ø (AES/EBU, DMX): 0,20 mm
- Copper strand Ø (AES/EBU, DMX): 0.0079 "
- Conductor insulation material: Foam / Skin-PE
- Conductor insulation Ø: 1,55 mm
- Conductor insulation Ø: 0.061 "
- Weight per 1 m: 76 g
- Weight at 1000 ft.: 51.1416 lbs
- Fire load per m: 0,25 kWh
- Style variant: round
- Packing: 100 m spool
- Temperature min.: -25 °C
- Temperature max.: 70 °C
- Width: 8 mm
- Width: 0.315 "
- Height: 8 mm
- Height: 0.315 "
- Capac. cond./cond. per 1 m (AES/EBU, DMX): 45 pF
- Capacity wire/wire at 1 ft. (AES/EBU, DMX): 13.716 pF
- Capac. cond./shield. per 1 m (AES/EBU, DMX): 110 pF
- Capacity wire/electic screen at 1 ft. (AES/EBU, DMX): 33.528 pF
- Impedance: 110 Ω
- Insulation resist. per 1 km: 0,1 GΩ
- Insulation resist. per 1000 feet: 0.0305 GΩ
- Insulation resist. per 1 km (AES/EBU, DMX): 0,1 GΩ
- Insulation resist. per 1000 feet (AES/EBU, DMX): 0.0305 GΩ
- Conductor resistance per 1 km: 87 Ω
- Conductor resistance per 1000 ft.: 26.5176 Ω
- Shield. resistance per 1 km: 15 Ω
- Shield. resistance per 1000 ft.: 4.572 Ω
- BPVo-Euroclass: Fca
* incl. tax, plus shipping, without trade discount.