a “piece of steel with holes in it”, but an important utensil for rack wiring in media technology and stage work. These panels should not just provide a decent cladding and an indestructible coating, but must also be constructed so they won’t give way or collapse when exposed to heavy strain and pressure. The front panels are made of black (PBS series...) or charcoal grey (PBA series...) powder-coated 1.2 mm or 2 mm sheet steel (depending on version). A U-profile on the top and bottom edges provides higher rigidity.
The optional strain relief clamp (order number ZEPB) can be used to reduce pressure on the cables on the back. For labelling we recommend our writable magnetic strip (order number ZSPB) or number strip (order number NSPB...). The broadcast series (PBQ...) is new to our product line. It is made of 4 mm anodised aluminium sheeting, reinforced by a rear stainless steel bracket. The connectors are all fitted from behind (the panels have been milled off from behind for this). The SYSBOXX SYPS-03-MK2 labelling profile can be used for labelling. Of course, we can also produce custom models. Please contact us by fax or e-mail (info@sommercable.com) with details of your project.
Article number
PBA1-KA1
EAN
4049371031776
Type
Rack panel, with brushes for cable inlet
Colour
anthracite
Colour detailed
black
Weight [kg]
0,335
Model
Brush height 437 mm
Model
Brush height 20 mm
Model
1 HE
Material
Sheet steel, 1.5mm
Additional function
Strain relief possible with ZEPB
Height unit [HE]
1
Old article number
PBS1-KA1
7016
Rack panel, with brushes for cable inlet, Brush height 20 mm, 1 HETechnical Data:- Article number: PBA1-KA1 - EAN: 4049371031776 - Type: Rack panel, with brushes for cable inlet - Colour: anthracite - Weight: 0,335 kg- Weight: 0.7385 lbs- Model: Brush height 437 mm - Model: 1 HE - Model: Brush height 20 mm - Material: Sheet steel, 1.5mm - Additional function: Strain relief possible with ZEPB - Height unit: 1 HE- Old article number: PBS1-KA1 - : 7016
a “piece of steel with holes in it”, but an important utensil for rack wiring in media technology and stage work. These panels should not just provide a decent cladding and an indestructible coating, but must also be constructed so they won’t give way or collapse when exposed to heavy strain and pressure. The front panels are made of black (PBS series...) or charcoal grey (PBA series...) powder-coated 1.2 mm or 2 mm sheet steel (depending on version). A U-profile on the top and bottom edges provides higher rigidity.
The optional strain relief clamp (order number ZEPB) can be used to reduce pressure on the cables on the back. For labelling we recommend our writable magnetic strip (order number ZSPB) or number strip (order number NSPB...). The broadcast series (PBQ...) is new to our product line. It is made of 4 mm anodised aluminium sheeting, reinforced by a rear stainless steel bracket. The connectors are all fitted from behind (the panels have been milled off from behind for this). The SYSBOXX SYPS-03-MK2 labelling profile can be used for labelling. Of course, we can also produce custom models. Please contact us by fax or e-mail (info@sommercable.com) with details of your project.
