A dime a dozen …
By now there are LED cables available, but only very few which are suitable for use in the sand by the sea, too. RGBW LED cables are often exposed to such adverse conditions like heat, sand, water or direct sunlight. Most standard control cables are not suitable for the permanent outdoor installation because they are neither UV resistant nor transeversely watertight and will therefore decompose over time under such heavy-duty use. We offer our RGBW LED cable with a halogen-free, UV resistant outer jacket – for outdoor and indoor use – incl. an additional waterblocking tape for continuous use in, under and by the water. Moreover, the AQUA cable is extremely notch-proof, cold flexible (-40°C), heat resistant (+80°C), sand-repellent, salt water resistant and perfectly suitable for mobile use, owing to tightly stranded 0.10mm (0.004 in.) class N6 OFC wires. Of course, it may be used also as a control line in medical areas or electrical engineering.
Advantages:
- UV-resistant and halogen-free
- Cross Waterproof by "Water Blocking Tape"
- Saltwater resistant, sand and dirt repellent
- Ideal for mobile use
- Temperature-resistant and flexible at low temperatures of -40 ° C to + 80 ° C
Application:
- Special RGBW LED cable to 5 adriger execution (4 wires for color channels + black return conductor)
- Extension for RGB strips or as an RGB signal lead
- For permanent installation in and around water max. Depth 10 m
Article number | 380-0241-05034AQ |
---|---|
Name | SC-Aqua Marinex LED Control |
EAN | 4049371315913 |
Jacket material | PUR-SR |
Jacket Ø [mm] | 5,10 |
Inner conductors (control) | 5 |
Inner conductors (control) [mm²] | 0,34 |
AWG (control) | 22 |
Copper strands (control) | 45 |
Copper strand Ø (control) [mm] | 0,10 |
Conductor insulation material | PE |
Conductor insulation Ø [mm] | 1,20 |
Weight per 1 m [g] | 45 |
UV-resistant | yes |
Fire load per m [kWh] | 0,24 |
Packing | bulk stock |
Temperature min. [°C] | -40 |
Temperature max. [°C] | 80 |
Max. water depth [m] | 10 |
Max. water pressure [bar] | 2 |
Width [mm] | 5,1 |
Height [mm] | 5,1 |
Capacity wire/wire at 1m (control) [pF] | 79 |
Capacity wire/wire at 1 ft. (control) [pF] | 24,0792 |
Insulation resist. per 1 km [GΩ] | 1 |
Insulation resist. per 1000 feet [GΩ] | 0,3048 |
Shield. resistance per 1 km [Ω] | 27 |
Shield. resistance per 1000 ft. [Ω] | 8,2296 |
Available since | V07.1 |
BPVo-Euroclass | Fca |
A dime a dozen …
By now there are LED cables available, but only very few which are suitable for use in the sand by the sea, too. RGBW LED cables are often exposed to such adverse conditions like heat, sand, water or direct sunlight. Most standard control cables are not suitable for the permanent outdoor installation because they are neither UV resistant nor transeversely watertight and will therefore decompose over time under such heavy-duty use. We offer our RGBW LED cable with a halogen-free, UV resistant outer jacket – for outdoor and indoor use – incl. an additional waterblocking tape for continuous use in, under and by the water. Moreover, the AQUA cable is extremely notch-proof, cold flexible (-40°C), heat resistant (+80°C), sand-repellent, salt water resistant and perfectly suitable for mobile use, owing to tightly stranded 0.10mm (0.004 in.) class N6 OFC wires. Of course, it may be used also as a control line in medical areas or electrical engineering.
Advantages:
- UV-resistant and halogen-free
- Cross Waterproof by "Water Blocking Tape"
- Saltwater resistant, sand and dirt repellent
- Ideal for mobile use
- Temperature-resistant and flexible at low temperatures of -40 ° C to + 80 ° C
Application:
- Special RGBW LED cable to 5 adriger execution (4 wires for color channels + black return conductor)
- Extension for RGB strips or as an RGB signal lead
- For permanent installation in and around water max. Depth 10 m
Article number | 380-0241-05034AQ |
---|---|
Name | SC-Aqua Marinex LED Control |
EAN | 4049371315913 |
Jacket material | PUR-SR |
Jacket Ø [mm] | 5,10 |
Inner conductors (control) | 5 |
Inner conductors (control) [mm²] | 0,34 |
AWG (control) | 22 |
Copper strands (control) | 45 |
Copper strand Ø (control) [mm] | 0,10 |
Conductor insulation material | PE |
Conductor insulation Ø [mm] | 1,20 |
Weight per 1 m [g] | 45 |
UV-resistant | yes |
Fire load per m [kWh] | 0,24 |
Packing | bulk stock |
Temperature min. [°C] | -40 |
Temperature max. [°C] | 80 |
Max. water depth [m] | 10 |
Max. water pressure [bar] | 2 |
Width [mm] | 5,1 |
Height [mm] | 5,1 |
Capacity wire/wire at 1m (control) [pF] | 79 |
Capacity wire/wire at 1 ft. (control) [pF] | 24,0792 |
Insulation resist. per 1 km [GΩ] | 1 |
Insulation resist. per 1000 feet [GΩ] | 0,3048 |
Shield. resistance per 1 km [Ω] | 27 |
Shield. resistance per 1000 ft. [Ω] | 8,2296 |
Available since | V07.1 |
BPVo-Euroclass | Fca |