transformer technology
These German-made microphone split transformers are custom-manufactured for SOMMER CABLE and impress by their linearity, little oscillation tendency and low coil impedances. The housings are designed for print mounting, have a Mu metal screen and thus guarantee an optimal shielding from interfering signals. We also supply the matching single pc boards for the SOMMER transformers – the SOMMER SPLIT BOARD for DIY assembly. This board is designed both for the 1:1 SPLIT and the 1:1+1 SPLIT in connection with a NEUTRIK® NC3FDH and is also available as a 4-channel version with 30 mm contact spacing for single-channel split solutions up to multi-channel splitter systems.
For extremely demanding applications we recommend the transformers of the Swedish manufacturer LUNDAHL. The LL1570 type is designed for microphone split applications with a maximum input level of +16 dBU, the LL5402 is a special line split transformer for max. line levels of 22 dBU (distortion < 1 % at 50 Hz). We deliver both models separately or on a ready-made 4-channel board with resonance damping and signal isolation. The 4-channel modules have been optimised for the use in SYSBOXX housings; these can be found in the “Modular Systems“ section. Both transformers fully comply with all broadcasting specifi cations.
Miscellaneous:
- Mounted on a SPLIT-BOARD with one XLR installation socket.
Article number | SPLIT-B-1:1 |
---|---|
EAN | 4049371015677 |
Brand | Sommer cable |
Application | Microphone transmission |
Model | Transformer 1+1 |
Distortion factor | < 1,0 % @ 40 Hz |
Type | 1:1 |
Housing screen | MU-Metall |
Frequency response | 40 – 15.000 Hz (±0,5 dB) |
Width [mm] | 28 |
Height [mm] | 17 |
Depth [mm] | 23 |
Output / load [Ω] | 10000 |
Input / source [Ω] | 600 |
Test voltage coil/core [V] | 500 |
Test voltage coil/coil [V] | 500 |
Level | max. 12 dB |
transformer technology
These German-made microphone split transformers are custom-manufactured for SOMMER CABLE and impress by their linearity, little oscillation tendency and low coil impedances. The housings are designed for print mounting, have a Mu metal screen and thus guarantee an optimal shielding from interfering signals. We also supply the matching single pc boards for the SOMMER transformers – the SOMMER SPLIT BOARD for DIY assembly. This board is designed both for the 1:1 SPLIT and the 1:1+1 SPLIT in connection with a NEUTRIK® NC3FDH and is also available as a 4-channel version with 30 mm contact spacing for single-channel split solutions up to multi-channel splitter systems.
For extremely demanding applications we recommend the transformers of the Swedish manufacturer LUNDAHL. The LL1570 type is designed for microphone split applications with a maximum input level of +16 dBU, the LL5402 is a special line split transformer for max. line levels of 22 dBU (distortion < 1 % at 50 Hz). We deliver both models separately or on a ready-made 4-channel board with resonance damping and signal isolation. The 4-channel modules have been optimised for the use in SYSBOXX housings; these can be found in the “Modular Systems“ section. Both transformers fully comply with all broadcasting specifi cations.
Miscellaneous:
- Mounted on a SPLIT-BOARD with one XLR installation socket.
Article number | SPLIT-B-1:1 |
---|---|
EAN | 4049371015677 |
Brand | Sommer cable |
Application | Microphone transmission |
Model | Transformer 1+1 |
Distortion factor | < 1,0 % @ 40 Hz |
Type | 1:1 |
Housing screen | MU-Metall |
Frequency response | 40 – 15.000 Hz (±0,5 dB) |
Width [mm] | 28 |
Height [mm] | 17 |
Depth [mm] | 23 |
Output / load [Ω] | 10000 |
Input / source [Ω] | 600 |
Test voltage coil/core [V] | 500 |
Test voltage coil/coil [V] | 500 |
Level | max. 12 dB |