are our 19“ stagebox systems (closed chassis) for installation in studio and stage racks. The 19“ housing is 94 mm deep. The number of height units (RU) is shown in the tables below.
For the XLR equipping we use locking metal panel mount connectors from HICON or NEUTRIK® and 2 ILME multipin connectors with two latching clamps each (ILME is generally compatible with Harting). The returns are only wired to the FOH output. We supply the stagebox with common grounding (for separate grounding see the following pages).
For our 19“ systems with transformer technology we normally use 1:1 transformers with MU metal shielding for optimum interference protection and a max. input of +12 dBu. The multipin 1 (FOH) receives the signals directly from the inputs and is connected to the returns, which allows 48 V phantom power supply from the FOH console, whereas multipin 2 (monitor) receives the transformerless signals (inputs only).
For an advanced signal distribution, e.g. to a remote truck, we can also offer a third multipin connector with 1:1+1 transformers. We gladly accept your written orders for custom designs by fax or e-mail under support@sommercable.com. Wiring diagrams can be found under www.sommercable.com/support
For more complex applications we recommend our modular SYSBOXX system, see the “Modular Systems“ chapter.
Article number | BLACKBOXX19-MP |
---|---|
Application | BLACKBOXX 19" -> Square-MP-connector |
Old article number | BXRX-M |
are our 19“ stagebox systems (closed chassis) for installation in studio and stage racks. The 19“ housing is 94 mm deep. The number of height units (RU) is shown in the tables below.
For the XLR equipping we use locking metal panel mount connectors from HICON or NEUTRIK® and 2 ILME multipin connectors with two latching clamps each (ILME is generally compatible with Harting). The returns are only wired to the FOH output. We supply the stagebox with common grounding (for separate grounding see the following pages).
For our 19“ systems with transformer technology we normally use 1:1 transformers with MU metal shielding for optimum interference protection and a max. input of +12 dBu. The multipin 1 (FOH) receives the signals directly from the inputs and is connected to the returns, which allows 48 V phantom power supply from the FOH console, whereas multipin 2 (monitor) receives the transformerless signals (inputs only).
For an advanced signal distribution, e.g. to a remote truck, we can also offer a third multipin connector with 1:1+1 transformers. We gladly accept your written orders for custom designs by fax or e-mail under support@sommercable.com. Wiring diagrams can be found under www.sommercable.com/support
For more complex applications we recommend our modular SYSBOXX system, see the “Modular Systems“ chapter.
Article number | BLACKBOXX19-MP |
---|---|
Application | BLACKBOXX 19" -> Square-MP-connector |
Old article number | BXRX-M |